Predictive Theoretical and Computational Approaches for Additive Manufacturing: Proceedings of a Workshop (2016)
Chapter: Appendix B: Workshop Agenda
Appendix B
Workshop Agenda
DAY 1: OCTOBER 7, 2015
| 8:00 a.m. | Introduction |
|
Wing Kam Liu, Northwestern University (Chair of the U.S. National Committee on Theoretical and Applied Mechanics and chair of workshop planning committee) |
|
| 8:15 a.m. | Session 1: Theoretical Understanding of Materials Science and Mechanics |
|
Facilitator: Wing Kam Liu, Northwestern University |
|
|
Speakers:Marianne Francois, Los Alamos National Laboratory |
|
|
Peter Olmsted, Georgetown University |
|
|
John Turner, Oak Ridge National Laboratory |
|
| 10:15 a.m. | Session 2: Computational and Analytical Methods in Additive Manufacturing |
|
Facilitator: Steve Daniewicz, Mississippi State University |
|
|
Speakers:Anthony Rollett, Carnegie Mellon University |
|
|
Wayne King, Livermore National Laboratory |
|
|
Corbett Battaile, Sandia National Laboratories |
| 1:15 p.m. | Session 3: Monitoring and Advanced Diagnostics to Enable Additive Manufacturing Fundamental Understanding |
|
Facilitator: Anthony DeCarmine, Oxford Performance Materials |
|
|
Speakers:Ade Makinde, GE Global Research Center |
|
|
Joseph Beaman, University of Texas at Austin |
|
|
Jian Cao, Northwestern University |
|
| 3:30 p.m. | Session 4: Additive Manufacturing Scalability, Implementation, Readiness, and Transition |
|
Facilitator: Slade Gardner, Lockheed Martin Space Systems Company |
|
|
Speakers:Yung C. Shin, Purdue University |
|
|
Lyle E. Levine, National Institute of Standards and Technology |
|
|
Anthony DeCarmine, Oxford Performance Materials |
|
| 5:15 p.m. | Adjourn Day 1 |
DAY 2: OCTOBER 8, 2015
| 8:15 a.m. | Session 5: Theoretical Understanding of Materials Science and Mechanics |
|
Facilitator: Wing Kam Liu, Northwestern University |
|
|
Speakers:Steve Daniewicz, Mississippi State University |
|
|
Neil Hodge, Lawrence Livermore National Laboratory |
|
|
Saad Khairallah, Lawrence Livermore National Laboratory |
|
| 10:15 a.m. | Session 6: Computational and Analytical Methods in Additive Manufacturing |
|
Facilitator: Steve Daniewicz, Mississippi State University |
|
|
Speakers:David Snyder, QuesTek Innovations |
|
|
Gregory Wagner, Northwestern University |
|
|
Joe Bishop, Sandia National Laboratories |
| 1:15 p.m. | Session 7: Monitoring and Advanced Diagnostics to Enable Additive Manufacturing Fundamental Understanding |
|
Facilitator: Slade Gardner, Lockheed Martin Space Systems Company |
|
|
Speakers:David M. Keicher, Sandia National Laboratories |
|
|
Edwin Schwalbach, Air Force Research Laboratory |
|
|
Yu-Ping Yang, EWI |
|
| 3:30 p.m. | Session 8: Additive Manufacturing Scalability, Implementation, Readiness, and Transition |
|
Facilitator: Anthony DeCarmine, Oxford Performance Materials |
|
|
Speakers:Rainer Hebert, University of Connecticut |
|
|
Alonso Peralta-Duran, Honeywell International Inc. |
|
|
Tahany El-Wardany, United Technologies Research Center |
|
| 5:15 p.m. | Adjourn Day 2 |
DAY 3: OCTOBER 9, 2015
| 8:30 a.m. | Session 9: Reflections |
| Theoretical Understanding of Materials Science and Mechanics | |
|
Facilitator: Steve Daniewicz, Mississippi State University |
|
|
Computational and Analytical Methods in Additive Manufacturing |
|
|
Facilitator: Wing Kam Liu, Northwestern University |
|
|
Monitoring and Advanced Diagnostics to Enable Additive Manufacturing Fundamental Understanding |
|
|
Facilitator: Jian Cao, Northwestern University |
|
|
Additive Manufacturing Scalability, Implementation, Readiness, and Transition |
|
|
Facilitator: Anthony DeCarmine, Oxford Performance Materials |
| 10:00 a.m. | Session 10: Closing Session |
|
Facilitators: Wing Kam Liu, Northwestern University |
|
|
Anthony DeCarmine, Oxford Performance Materials |
|
| 12:00 p.m. | Adjourn Workshop |
